Descriptions; Whirley Gig, Nuro Net-p1

Descriptions; Whirley Gig, Nuro Net-p1

2013/10/27

Author A-Z Tek Operations Inc.

Descriptions Whitley Gig, Nero Net

Whirley Gig’s design is {operational in – air, water, space}, with a twin cone type armature, including multiple tracks to control each side of the armature to maintain control and stability of the unit, centrifugal spin will hold a horizontal level with gravity with rotation.

The design is interactive with Electricity, Heat, Refrigeration, to obtain refrigerated thrust, all components are designed to be completely part on the units assembly & operation. {A fog should be the only emission from the unit to the atmosphere}, {This will also be the source of propulsion in space}.

Hexagon light weight  tubing would be used as the hull frame, this will provide a seven chamber tube with high structural strength. (“like an apple slicing tool”)

This will also provided high volume and pressure capabilities, for the flow of (ac coolant), (core shaft lubricant cooling), distributed evenly threw the framing were required, to cool the ports and create frost and ice to create required thrust conditions

The circumference disks { Six ported rotating trust disks, heated and cooled to accommodate different conditions and requirements} are located at each level, {eight in all}.
That will require two sets of six plates with thrust ports back to back with a port block between each set of six to direct trust, but as well able to run neutral current. the basic fazing types here would be, (negative, positive),(negative, negative), (positive, positive) in a variety of series

Each connected directly to the generator section on the centre hub that’s generating power, with current connection points around the outside circumference like a generator this can generate a very high amperage to a low amperage, this one would be connected in series to the eight disks levels. of the unit.

While rotating the six disks will be frosted to point of creating a sealed ice gasket to maintain a none friction surface.
Keeping none moving sections and moving sections  of the ports tight and turbulence free. to maintain & contain air flow,{“thrust”} within the disk and stationary ports &  components.

The port configuration for the optimum configuration should be computer designed for optimum port & thrust capabilities.
Each disk level disks should run in opposite directions of each other. Each of the eight levels can be adjusted to the desired r.p.m. for lift & control of the Whirley Gig.
Design Regarding Nuro Net.

Nuro Net, is a weather control network operating on scale sized Wrigley Gigs, this will control the weather globally.

I will explain the theory,

Scaled to size as per duty Willey Gig.  my design is {operational in – air, water, space}

To be position at all longitude and latitude location around the globe, with a northern control unit cluster , a southern control unit cluster, the equator will require a three units cluster . { three rows on the circumference of the globe}

north south to be balanced with the centre units, being fed to the system. “this will correct the temperature range” combine the light spectrum in the program include the eco table re the four seasons. to reduce heat by day & reduce cold at night.

The sun reflections can be discourage or encourage by way of a receiver and a “day night filter”, and the light spectrum filter.

“my personal fist opinion on the colour range for sun rise and sun set would be a very light blue for sun rise with a damper from black to white”

using the light spectrum “the sun” to adjust the filters generated in global areas from the units in place as required to achieve the task or tech manipulated to achieve the task.

Thus giving complete control over weather of all types in all areas globally.
Imagine – Storms & hurricanes,  degeneration before they get out of hand

This method will {“reducing static”} ” It’s a perfect control platform for our global environment “!
Best Wishes:
Cordiality Yours;.
Founder & Director: A-Z Tek Operations Inc.
Mr. G A. Garner Director @ director@a-ztekoperationsinc.com
Family Original Registered Name. Mr. G A. Ham
Sin: — — 297
Born January 16, 1957

 

Seeking assistance in regards to my promotional items on this website.



A-Z Tek Operatins Inc. Water Mark logo

Best Wishes, Cordiality Yours, Registered Name, Founder & Director: A-Z Tek Operations Inc. Mr. Glenn Allan. Garner Sin: xxx-xxx-xxx
Original Registration Family Name. Mr. Glenn Allan. Ham Sin: — — 297 Born January 16, 1957

Presented by
A-Z Tek Operations Inc. & Custom Website Division
ALL RIGHTS RESERVED 1998 © 2015

Previewed  links to my mailing list-  Founder Director C.E.O. A-Z Tek Operations Inc. A.Z.T.O.I.C.W.D. Mr. Glenn Allan Garner sin. # 456-118-553

Original Family Name Mr. Glenn Allan Ham sin. # – – –  – – – 297

Original Registrations Ontario. Canada.